无码中文资源在线播放-午夜性无码专区-亚洲欧美日韩国产成人精品影院-美女把尿囗扒开让男人添-久久99久久99精品免观看

ZJ-EP510
Two component epoxy potting adhesive

ZJ-EP510 is a two component epoxy adhesive that solidifies to form an elastomer with excellent properties such as aging resistance, vibration fatigue resistance, and low temperature corrosion resistance. ZJ-EP510 not only has adhesive sealing properties for metal substrates, but also is suitable for adhesive sealing of low surface energy substrates such as PVC and PC. ZJ-EP510 meets the requirements of low odor, low VOC emissions, EU ROHS regulations, and UL94 flame retardant V0 requirements. ZJ-EP510 is suitable for machine dispensing and manual mixing operations. ZJ-EP510 is mainly used for insulation, waterproofing, and sealing of small and medium-sized electronic components.

Product features

Wide adaptability of substrate

Excellent aging resistance

Flame retardant V-0

Product parameters
Performance before curing Unit Typical value Test method
Appearance

A: Black fluid

B: White fluid

Visualization
Density

g/cm3

A: 1.55 ± 0.05
B: 1.55 ± 0.05

Cure: 1.55 ± 0.05

GB/T 533-2008

Viscosity

cps

A: 20,000~30,000
B: 20,000~30,000

GB/T 2794-2013, 10 rpm

Mixing ratio

v/v

1:1

Surface drying time

min

> 30

GB/T 13477.5-2002

Initial curing time

min

< 60

50 °C/50 %RH

Hardness

Shore-D

72 ± 5

GB/T 531.1-2008

Thermal conductivity

W/m.k

0.6

ASTM D5470-2017

Volume resistivity

ohm.cm

≥ 1*10^12

GB/T 1410-2006

Flame retardancy

V-0

UL94

Body tensile strength

MPa

≥ 25

GB/T 528-2009

Elongation at break

%

≥ 5

GB/T 528-2009

Tensile shear strength (Al – Al)

MPa

≥ 8

GB/T 7124-2008

The data in the table is for reference only, please refer to the measured data.
Operation and Safety
  • usage method:
  • ? Surface cleaning
  • Use gauze or other tools to remove dust, loose materials, oil stains, and surface water stains from the surface of the area that needs to be coated. If there is rust on the area that needs to be coated with glue, first remove it with a metal brush, and then wipe the surface with acetone and alcohol.
  • Primer and cleaning agent
  • To achieve optimal adhesion performance, corresponding primers and cleaning agents should be used. When applying primer and cleaning agent, it should be ensured that the application is uniform and there is no accumulation of primer or cleaning agent or the surface of the substrate is not covered.
  • ? Mixing
  • Take out component A and component B in proportion, stir and mix evenly, vacuum to remove bubbles, and pour them onto the product to be sealed during the operation period. If the sealed product is too large, it is recommended to seal it in batches.
  • matters needing attention:
  • When ZJ-EP510 two-component epoxy structural adhesive is used in immersion applications, it should be fully cured before immersion.
  • Wet coating technology is not allowed, and it is recommended not to use solvents, water, cleaning agents, or soap solutions.
  • Before consulting the technical personnel of Zhijiang, it is not allowed to use high chlorine disinfection areas such as swimming pools.
  • Moisture can have a negative impact on the curing process and final strength, and it is necessary to prevent the main agent and curing agent from getting damp. Keep the packaging sealed and store in a dry place. The surface on which the substrate is bonded must be clean, dry, and free of dust and any grease. Before using this product, the main agent must be stirred evenly. Our company's technical department can provide further detailed information.
  • Pre test procedure
  • In order to eliminate potential problems in the application site, Zhijiang can sample various materials used for adhesives, pre determine the best adhesive to be used, and develop the best surface treatment method to obtain the best adhesive performance. Please consult the technical personnel of Zhijiang for specific information.
Color and packaging

According to customer requirements, we can provide 20 L small barrels and 200 L large barrels for packaging

Storage and expiration date

It is recommended to store in a cool and dry place for a storage period of 6 months;

Incorrect storage conditions can affect product application and performance after curing

主站蜘蛛池模板: 国产亚洲精品久久久久久无亚洲| 免费无码av片在线观看国产| 午夜精品久久久内射近拍高清| 欧美人与动性xxxxbbbb| 美女被抽插到哭内射视频免费| 蜜臀av色欲a片无码一区| 新香蕉少妇视频网站| 亚洲国产成人福利精品| 国产精品亚洲精品一区二区| 少妇久久久久久人妻无码| 亚洲欧洲国产成人综合在线| 亚洲欧美日韩在线一区| 欧美人与动牲猛交xxxxbbbb| 日本强好片久久久久久aaa| 国产农村乱辈无码| 国产精品天干天干| 成人午夜福利视频镇东影视| 国产精品成人网址在线观看| 熟妇熟女乱妇乱女网站| 成人区精品一区二区不卡| 日本高清免费毛片久久| 无码高清 日韩 丝袜 av| 亚洲欧洲日产国码aⅴ| 在线高清国语成人网站| 少妇被粗大的猛烈进出图片 | 视频久re精品在线观看| 中文字幕亚洲码在线| 久久久精品国产sm调教网站| 欧美亚洲自偷自偷图片| 欧美40老熟妇色xxxxx| 青青青国产精品一区二区| 欧美大屁股喷潮水xxxx| 久久中文字幕无码a片不卡古代| 麻豆一精品传媒卡一卡二传媒 | 精品精品国产高清a毛片| 精品人妻无码一区二区色欲产成人 | 亚洲大尺度无码无码专区| 2020最新无码福利视频| 欧美人与动牲交zooz| 免费国产黄网站在线看| 97精品依人久久久大香线蕉97|